 | 61.
Our New Mexico log home. (February 21, 2012)| The never ending log home project. Started five years ago and still working on it |
| 5714 Visits
620 Images
Shared Album | |
|
 | 62.
VC1 T202 engine. (February 21, 2012)| Pictures of a 1940 T202 Dodge 218 engine. |
| 594 Visits
5 Images
Shared Album | |
|
 | 63.
VC1 top bow front left channel (February 20, 2012)| The VC1 top bow front left channel completed. Pictures showing rear bow and header. One side is complete except for the special shoulder bolts which are being made. Also started taking the header apart to straighten dents by drilling out spot welds. |
| 764 Visits
28 Images
Shared Album | |
|
 | 64.
VC1 bow set reproduction hinge. (February 20, 2012)| The hinge on the right is a reproduction hinge I had cast from an original hinge on loan from Ernie Ongaro. Thanks to his generosity I now have all the components to finish my top bow set. |
| 262 Visits
1 Images
Shared Album | |
|
 | 65.
VC1 dash plate. (February 20, 2012)| Picture of the VC1 dash plate only stamped areas remain all painted areas are gone due to weather exposure. |
| 447 Visits
2 Images
Shared Album | |
|
 | 66.
Removing VC1 rear springs (February 18, 2012)| Removing rear spring head less bolt with home made puller. The process is to remove the grease zerk then set the pipe with the 3/8 X 24 bolt over the headless bolt and thread the bolt into the zerk hole and tighten the nut to extract the bolt back into the pipe. The clamping bolt that holds the headless bolt in place must be removed completely before you start thigtening the nut. |
| 309 Visits
7 Images
Shared Album | |
|
 | 67.
Removing VC 1 body (February 14, 2012)| Ed helping me remove the body tub from the VC 1 frame. |
| 824 Visits
14 Images
Shared Album | |
|
 | 68.
VC 1 bumper repair (February 14, 2012)| Repairing twisted frame horns befor installing new bumper, |
| 433 Visits
17 Images
Shared Album | |
|
