 | 1.
Chama Pow Wow 2018 (July 27, 28, 29, 2018)| Photos of narrow gauge train trip between Chama and Cumbres Pass and return. Also photos of the Sunday BBQ at Leonards |
| 1716 Visits
44 Images
Shared Album | |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 | 12.
Santa Fe Reunion 2016 (June 13, 2016)| Pictures of 2016 reunion held in Colorado Springs, Colorado. Event organized by Joe and Sherry Tosh with the help of their support staff. |
| 1141 Visits
17 Images
Shared Album | |
|
 |
|
 | 14.
1940 Dodge VC5 (May 17, 2014)| The latest addition to my VC collection |
| 4396 Visits
54 Images
Shared Album | |
|
 | 15.
M422 Mighty Mite (September 7, 2013)| Pictures of the start of the restoration process. |
| 23682 Visits
665 Images
Shared Album | |
|
 |
|
|
| 17.
VC1 license plate light (January 12, 2013)| Pictures of the VC1 license plate bracket with license plate light installed. The light bucket is a 1933, 1934, 1935 plymouth, 1937, 1938 Dodge Hump Back or a Dodge VC6. These light buckets are frog hair items however there is a reproduction 1934 plymouth bucket available. |
| 1 Albums
Shared Folder | |
|
 | 18.
VC1 brush guard mounting rods (August 19, 2012)| Picture of two types of original bruch guard rods that attach the brush guard to the frame. I am still figureing out which of the two is for a VC. My theory right now is that the left set is for a VF. Once I am 100% sure I will correct the picture album. |
| 334 Visits
1 Images
Shared Album | |
|
 |
|
 | 20.
VC1 donor (March 27, 2012)| Pictures of my VC1 donor body. |
| 932 Visits
5 Images
Shared Album | |
|
 | 21.
VC1 front bumper (March 26, 2012)| Pictures of the VC1 front bumper with the license plate bracket attached. |
| 1515 Visits
10 Images
Shared Album | |
|
 | 22.
VC1 radiator (March 26, 2012)| Pictures of the VC1 radiator. |
| 1116 Visits
7 Images
Shared Album | |
|
 |
|
 | 24.
VC1 mirror mounting brackets. (March 22, 2012)| Pictures of the two rear mirror mounting brackets. Note that the side mirror bracket mirror mounting hole is tapped to accept the mirror stud. The mirror is a reproduction. The header mirror bracket is not tapped. The header mirror is a reproduction but as you see the mounting stud is not correct. I also included a picture of what remained of my header mirror which was the mounting stud. You can modify the reproduction mirror by cutting and tapping the mount for a screw and star washer |
| 1409 Visits
12 Images
Shared Album | |
|
 | 25.
VC1 gas tank mounting hardware. (March 22, 2012)| Pictures of all the straps,curved brackets and the frame cross member for mounting the gas tank. |
| 1375 Visits
11 Images
Shared Album | |
|
 | 26.
VC1 front differential housing. (March 22, 2012)| Pictures of the front differential housing and the special bolts that attach the third member. The special tapered bolts press in from the inside. |
| 560 Visits
3 Images
Shared Album | |
|
 | 27.
VC1 transfer case (March 22, 2012)| Pictures of the VC1 transfercase showing part number. The transfercase is very similar to the WC except for five additional case bolts and I belive there is a difference with the diameter of one of the shaft seals I am still investaging that. |
| 1024 Visits
4 Images
Shared Album | |
|
 | 28.
VC1 Bell Housing. (March 21, 2012)| Pictures of the VC1 bell housing with the throw out bearing fork still installed. The part number of the bell housing is 579298-3 |
| 1036 Visits
7 Images
Shared Album | |
|
 | 29.
VC1 carbureter (March 7, 2012)| Pictures of the Carter DTA-2 carbureter for the VC1. I also included a picture of the carb rebuild kit. |
| 930 Visits
8 Images
Shared Album | |
|
 | 30.
VC1 maintenance manual (March 5, 2012)| Maintenance manual dated September 1941 |
| 244 Visits
1 Images
Shared Album | |
|
 | 31.
VC1 black out switch. (March 5, 2012)| Picture of the VC1 black out light switch. The VC1 does not have black out lights this switch just prevents certain lights from turning on. |
| 273 Visits
5 Images
Shared Album | |
|
 | 32.
VC1 panel light switch. (March 5, 2012)| VC1 panel light switch when pulled lights up the instruments on the dash. |
| 254 Visits
3 Images
Shared Album | |
|
 | 33.
VC1 6 volt coil. (March 5, 2012)| Picture of the VC1 fire wall mounted coil and ignition key assembly. |
| 287 Visits
4 Images
Shared Album | |
|
 |
|
 | 35.
VC1 front left and right canvas doors (March 4, 2012)| VC1 left and right front canvas doors. I am still looking for a set of rear doors so if anyone has a lead please let me know. |
| 250 Visits
3 Images
Shared Album | |
|
 |
|
 | 37.
VC1 wiper motors (March 4, 2012)| VC1 wiper motors with all the proper spacers. |
| 223 Visits
1 Images
Shared Album | |
|
 | 38.
VC1 canvas front door latch. (March 4, 2012)| This is a canvas door latch you will notice that this latch has a round lever instead of the WC thumb lever. I also included a picture of a WC lever. |
| 539 Visits
4 Images
Shared Album | |
|
 | 39.
VC1 knurled thumb screw. (March 4, 2012)| This is the knurled thumb screw that holds the VC1 top bow header to the door post. There is one on each side. |
| 297 Visits
4 Images
Shared Album | |
|
 | 40.
VC1 pintle hitch (March 4, 2012)| Pictures of pintle hitch. |
| 391 Visits
4 Images
Shared Album | |
|
 | 41.
VC1 seats and seat frames (March 4, 2012)| Here are pictures of the VC1 seats and the frames. I put a WC 1/2 ton front seat frame next to the VC1 seat frame so the difference can be seen. In the picture the right seat frame is a WC seat frame with the foot rest missing. Thanks to Ernie Ongrao for allowing me to take the pictures. |
| 1479 Visits
23 Images
Shared Album | |
|
 | 42.
VC1 voltage regulator. (March 4, 2012)Chrysler Corporation regulator part number:
VRP-4001-A. This regulator is a 35 amp unit. I also included a picture of an Autolite VRP-4001-A. It appears that Chrysler used a black data tag and Autolite used a red tag even though Autolite made the regulator for Chrysler. |
| 1016 Visits
4 Images
Shared Album | |
|
 | 43.
VC1 spare tire carrier mount plate (March 4, 2012)| This is the mounting plate that holds the spare tire to the mount. The nut is made to have a lock. The nut is a reproduction. |
| 243 Visits
6 Images
Shared Album | |
|
 | 44.
VC1 tail light. (March 3, 2012)| The tail light ia a new old stock unit and the hood is a reproduction. |
| 299 Visits
4 Images
Shared Album | |
|
 | 45.
VC1 top bow header dent repair (March 2, 2012)| Pictures showing the process to split the top bow header to make repairs and remove dents. |
| 578 Visits
11 Images
Shared Album | |
|
 | 46.
VC1 gas tank (March 1, 2012)| Pictures of the VC1 gas tank and mounting straps. Added pictures of the filler neck and filler cap. The filler neck connects to the fuel tank with a large and small rubber hose and clamps. |
| 249 Visits
7 Images
Shared Album | |
|
 | 47.
VC1 door post trim (March 1, 2012)| Pictures of the door post trim that goes on either side from the dash up to the window header. |
| 371 Visits
10 Images
Shared Album | |
|
 |
|
 | 49.
VC1 head light switch (March 1, 2012)| Pictures of the VC1 head light switch. |
| 483 Visits
4 Images
Shared Album | |
|
 | 50.
VC1 distributor (March 1, 2012)Pictures of a VC1 distributor with the following information:
Chrysler Corporation Solar Spark Ignition
Model number-IGS4901-1
Serial Number-3U63226 |
| 476 Visits
3 Images
Shared Album | |
|
 | 51.
VC1 starter motor (March 1, 2012)Picture of a VC1 starter motor with the following information:
Chrysler Corporation Positive Shift Starter.
Model number-MZ-4059-A
Serial Number-2W033---
Undable to read the last digets of the serial nimber at this time. |
| 437 Visits
4 Images
Shared Album | |
|
 | 52.
VC1 generator (March 1, 2012)Picture of a VC1 generator. The generator model number is as follows:
Chrysler Corporation part number 1257391
Auto-Lite part number GGW-6001A
Serial Number - 8D205031
Amps-40 |
| 350 Visits
4 Images
Shared Album | |
|
 | 53.
VC1 head light (March 1, 2012)| Pictures of a VC1 head light. The head light is not a seal beam type it is a lens and reflector type. The reflector is silvered not chromed. The lens was made by Corcron Brown. |
| 443 Visits
17 Images
Shared Album | |
|
 |
|
 | 55.
VC1 transmission. (February 21, 2012)| Interior view of transmission. Pictures of shift tower with 4 wheel drive inerlock lever added. |
| 654 Visits
6 Images
Shared Album | |
|
 |
|
 | 57.
VC1 rear fender repair. (February 21, 2012)| The rear fenders have heavy damage but since they are hard to find and different than the civilan truck I have to repair them. |
| 444 Visits
18 Images
Shared Album | |
|
 | 58.
VC1 frame and engine. (February 21, 2012)| Various pictures of VC1 frame and engine. You will notice that the engine is painted gray but under the gray is the MOPAR silver. This engine went thru a rebuild so I imagine it was painted gray at that time. |
| 455 Visits
14 Images
Shared Album | |
|
 | 59.
Removing VC1 T202 engine. (February 21, 2012)| Getting the T202 engine out so I can get the body off. |
| 1329 Visits
18 Images
Shared Album | |
|
 | 60.
Our New Mexico log home. (February 21, 2012)| The never ending log home project. Started five years ago and still working on it |
| 6878 Visits
620 Images
Shared Album | |
|
 | 61.
VC1 T202 engine. (February 21, 2012)| Pictures of a 1940 T202 Dodge 218 engine. |
| 609 Visits
5 Images
Shared Album | |
|
 | 62.
VC1 top bow front left channel (February 20, 2012)| The VC1 top bow front left channel completed. Pictures showing rear bow and header. One side is complete except for the special shoulder bolts which are being made. Also started taking the header apart to straighten dents by drilling out spot welds. |
| 873 Visits
28 Images
Shared Album | |
|
 | 63.
VC1 bow set reproduction hinge. (February 20, 2012)| The hinge on the right is a reproduction hinge I had cast from an original hinge on loan from Ernie Ongaro. Thanks to his generosity I now have all the components to finish my top bow set. |
| 288 Visits
1 Images
Shared Album | |
|
 | 64.
VC1 dash plate. (February 20, 2012)| Picture of the VC1 dash plate only stamped areas remain all painted areas are gone due to weather exposure. |
| 487 Visits
2 Images
Shared Album | |
|
 | 65.
Removing VC1 rear springs (February 18, 2012)| Removing rear spring head less bolt with home made puller. The process is to remove the grease zerk then set the pipe with the 3/8 X 24 bolt over the headless bolt and thread the bolt into the zerk hole and tighten the nut to extract the bolt back into the pipe. The clamping bolt that holds the headless bolt in place must be removed completely before you start thigtening the nut. |
| 338 Visits
7 Images
Shared Album | |
|
 | 66.
Removing VC 1 body (February 14, 2012)| Ed helping me remove the body tub from the VC 1 frame. |
| 848 Visits
14 Images
Shared Album | |
|
 | 67.
VC 1 bumper repair (February 14, 2012)| Repairing twisted frame horns befor installing new bumper, |
| 467 Visits
17 Images
Shared Album | |
|
 | 68.
Bring my VC1 home. (January 31, 2012)| I found this VC1 in Devore, Ca and with the help of Ken J, George and Ed I got it home for restoration. |
| 3263 Visits
86 Images
Shared Album | |
|
