 enlarge 54KB, 640x478
The first 4 pix are the rearmost mounts under the bed, and show repairs to them made several years ago. I was lucky enough to "find" washers that were the correct size to exactly fit the new Poly body biscuits..
|  enlarge 56KB, 640x478
|  enlarge 59KB, 640x478
|  enlarge 68KB, 640x478
|  enlarge 57KB, 640x478
This photo and the next one are the mounts under the firewall. These were the most difficult to fix, as the body was still on the frame at the time.
|  enlarge 52KB, 640x478
|  enlarge 99KB, 750x561
|  enlarge 81KB, 750x561
|  enlarge 102KB, 750x561
|  enlarge 108KB, 750x561
Chassis man - "Bud".
|  enlarge 73KB, 750x561
|  enlarge 99KB, 750x561
|  enlarge 113KB, 750x561
|  enlarge 115KB, 750x561
|  enlarge 86KB, 750x561
The next few pictures show the frame being 'notched' to allow a larger rear tire.
|  enlarge 105KB, 750x561
Before
|  enlarge 100KB, 750x561
Before
|  enlarge 120KB, 750x561
After
|  enlarge 141KB, 750x1002
After
|  enlarge 222KB, 750x1023
|  enlarge 96KB, 750x450
|  enlarge 107KB, 750x523
|  enlarge 88KB, 750x417
Welding is finished and waiting for a coat of paint.
|  enlarge 18KB, 287x300
Heh-heh.....
|  enlarge 12KB, 148x119
| |
|
|
