 66D100
1966 D100 lwb A318poly 4sp 8.75 3:55 suregrip
|  A318 poly in my 66D100
This engine has a factory cast iron 4v intake.
Valve adjustments for A318 solid lifter engine are in "tech stuff" page, under photo 59.
|  1965 Belveder 1
My daily driver A318poly 727A 3.23
open------ Sold this car last spring 08, was fun to have it and drive it
for almost 10 years, when't to a good
Mopar home were they still drive around town!
|  65 Belveder
My daily driver with my 1962 D100
in the back ground
|
 65 car A318poly
well dressed poly in my 65 Belveder
|  My 65 Dart GT
75,000 orignal miles, only, brakes, fluids,tires, belts and hoses changed since it came from the factory.
|  inside the Dart
not a rip or tear to be seen
|  inside again
Inside looks almost new
|
 Dart trunk
looks as nice as it is, even the
trunk mate only has miner wear
|  Dart under the hood
273LA 2bbl Carter 904 auto....
only hoses and belts, new brake master, good cleaning and paint on the radiator
|  Just another shot
This car was in such good shape I drove it from SD to WA after just
miner mantaince.
|  Dart back
back is a nice as front, orginal
paint does have some nicks and miner parking lot dings
|
 My 68 D100 short wide bed
383 727B 3.55 suregrip Auburn
The new paint sure has this truck looking nice, took some time to get it this far....
|  My 68 agian
Still have the cab to clean up, but coming along nice.
I will be doing some engine up grades soon to the 383 under the hood...
|  68 cab
Customized cab on my 68.
Bucket seats from a Monty
and center from a Chev Sub.
Carpet kit (molded) from http://www.stockinteriors.com
|  68 cab pass side
|
 68 Oasis M300 Dodge RV
Found this not far from home, built on a M300 foward control frame, it has a A318poly,
short shaft 727, Dana 70 to push it down the road. Shifter is a cable lever dash mounted. Grill is same as used on mid65 to 67 pickups.
|  M300 RV
All though it is a 68M300 frame I'm
sure that the frame was made in 67
as the A318poly block engines are not
common after 66 anywere but in Canada.
|  M300 RV
This rig is really in nice shape, inside nicer than the outside and
hole rig has been well cared for.
Owner said it may come up for sale in
a year, or two, as he will not be able to drive anymore.
Up Date: I now own it!
|  68 M300 Oasis RVand 66 D100
on the job in E Washington RV camp
|
 Amber lense
Used on 62 to 67 Dodge trucks,
I sell these new, contact me for information. jeffc@pcez.com
|  Clear lense
used on the 61 Dodge truck
|  Tail light 61 to 65
5.25" round lens used on full size beds, A100 and A108 vans and some later utiline (stepside) beds.
contact me for prices and shipping
|  383 in my 68D100
this engine basic stock with 2v and
Carter 2bbl, also has car exhaust manifolds instead of the center dump types that would be stock to trucks.
Sure looks nice since I cleaned it
up a painted it the right color.
Added block huggers to this engine in the tech section.
|
 Getting ready to work
Starting some work on my 68 D100 short wide 383 727 to clean up
what someone else started.
This truck came from the factory
with \6 4sp, they installed the
bb and 727, now to make it look almost
like a factory install is what I'm
after.
|  383 68D100
just showing the other side, the 383,
even with a 2bbl, sure makes it scoot.
|  Mvc-006s 2
68 383 727 stock linkage and
Carter bbd carb.
For a history of the 727 in trucks and
kickdown linkage adjustments check in the tech section under photo 23
|  64 D100 A318poly
installed in my 64D100 lwb 727 custom. This truck is a longterm
resto project, came from factory with
push button shifter for the 727.
|
 Fury A318 intake
installed in 1957 and 1958 Plymouth
Fury's. 2 WCFB Carter carbs
|  other side of 2x4 intake
This is the stock set up with linkage installed
|  70 D500 dump truck
This a Vancouver, Washington schoool distric truck, still in use
as of 2004
|  Poly318-1
Gene's 60 A318poly stroker that
is installed in Dodge C500 truck
|
 Gene's 60 C500 before
|  Gene's 60 C500 after
Sweet, even has a 69 Dodge Hemi Charger on the roll back.....
and that poly stroker under the
truck hood
|  Rene's 67 CS
He has been work hard on his truck.
Was a D200 Camper Special but he
wanted the 100 running gear so swapped in the 1/2 ton axles.
|  Rene's 67 again
He also has install a LA360 and 4 speed in what was a 318 auto truck.
|
 Evar's 66D300
Darn nice strait truck
|  Evar's 300
Evar hope's to have he's truck
sand blasted and paint soon.
This rig was used by a well drilling
company for years before he had it.
|  Evar's D300 rear
Got to love that 9 foot bed
|  Chris 66W200 on a 97 frame
|
