• Public Gallery  • Help  
• Join Now!  • Log In  • Feature Tour
 holl_ands | Home > Yagi Antennas > 
Hi-VHF 13-El FD-Yagi (2ReflRods) - kgb
Hi-VHF Optimized 13-Element Folded Dipole Yagi (2 Reflector Rods), RESCALED from
a UHF design posted by kgb, analyzed using 4nec2.  Presumes use of Type M Copper Tubing
with O.D.=0.5695-inch.
Boom Length=115.33-in (9.6-ft).

Hi-VHF Raw Gain = 8.3 to 11.3 dBi, F/B & F/R Ratio Min. = 16.5 dB (GOOD) and SWR Under 2.4.
Date(s): 17 Jun 2010. Album by holl_ands. 1 - 11 of 11 Total. 7495 Visits.
Start SlideshowTo order prints and photo-products: 1. Select photos. 2. Click Order. 3. Select products.Select images and click to download to your computer 
Enlarge photo 1
enlarge 63KB, 1024x868
1
Hi-VHF Optimized 13-Element Yagi (Rescaled kgb)
3D View

Enlarge photo 2
enlarge 119KB, 1152x414
2
Hi-VHF Optimized 13-Element Yagi (Rescaled kgb)
Top View
[1 small square = 2.0 inch]

Enlarge photo 3
enlarge 141KB, 1152x526
3
Hi-VHF Optimized 13-Element Yagi (Rescaled kgb)
Front View
[1 small square = 1.0 inch]

Enlarge photo 4
enlarge 141KB, 1024x648
4
Hi-VHF Optimized 13-El Yagi (Rescaled kgb)
Hi-VHF Raw Gain = 8.3 to 11.3 dBi
F/B & F/R Ratio Minimum = 16.5 dB

Enlarge photo 5
enlarge 170KB, 1024x648
5
Hi-VHF Optimized 13-Element Yagi (Rescaled kgb)
Hi-VHF SWR (300-ohm) Under 2.4

Enlarge photo 6
enlarge 139KB, 1024x648
6
Hi-VHF Optimized 13-Element Yagi (Rescaled kgb)
Hi-VHF Impedance

Enlarge photo 7
enlarge 301KB, 1024x1024
7
Hi-VHF Optimized 13-Element Yagi (Rescaled kgb)
Hi-VHF Azimuthal Pattern at 174 MHz

Enlarge photo 8
enlarge 303KB, 1024x1024
8
Hi-VHF Optimized 13-Element Yagi (Rescaled kgb)
Hi-VHF Azimuthal Pattern at 198 MHz

Enlarge photo 9
enlarge 307KB, 1024x1024
9
Hi-VHF Optimized 13-Element Yagi (Rescaled kgb)
Hi-VHF Azimuthal Pattern at 216 MHz

Enlarge Microsoft Word Document 10
enlarge 30KB, 791x1024
DOC10
Hi-VHF Optimized 13-Element Yagi (Rescaled kgb)
4nec2 File

Enlarge photo 11
enlarge 69KB, 1152x246
11
Hi-VHF Optimized 13-Element Yagi (Rescaled kgb)
Side View
[1 small square = 2.0 inch]

 
 Select All.  
  Sign the Guestbook. Displaying 1 of 1 entries.
In your nec model for this antenna,  you have defined two SY cards with the same variable(S12). 4nec2 does not allow this, and I am unable to duplicate your results.

The two declaration for S12 are:
S12= 1301/1000   and S12= S11 + S1112
 - autofils, Fri, 18 Jun 2010 10:59AM