ARION SDI-1 Distortion
ARION SDI-1 Distortion
Complete with Original Box and manual
The SDI-1 Stereo Distortion pedal brings heavy distortion with excellent control over tone and intensity - this is Arion's low-cost, versatile effects solution for stereo distortion fanatics. A direct/soft switch and two output design allow for further custom tailoring of your sound. Arion's Stereo Distortion effects pedal features an easy-open battery compartment for simple 9-volt operation.
PEDAL OPERATION: Press pedal down for on position. LED will be on. Depress again for off position. LED will be off.
LED CHECK: When bright, indicates on and effect is on. When getting dark, battery is losing power.
OUT 2/MODE SWITCH: A switch to change the direct sound to effected sound and vice versa for OUT 2. When the switch is set to DIRECT, the direct sound can be obtained at OUT 2. When set to SOFT position, a soft distortion can be obtained.
LEVEL: To control the difference between normal volume and effected volume. The volume will increase by turning it clockwise and decrease by turning it counterclockwise.
TONE: To control the tone quality of distortion effect. When turned clockwise, the high tone is emphasized, giving crisp and clear sounds. When turned counterclockwise, the low tone is emphasized, giving soft sounds.
DIST: To control the degree of distortion. The degree will increase when turned clockwise and decrease when turned counterclockwise.
[SPECIFICATIONS]
Power Requirements: DC 9V Battery or 100mA-200mA AC Adapter
Consumption Current: DC 9V 7.2mA
Input Impedance: 300K Ohms
Output Impedance: 10K Ohms or more
Noise Level: -65dB, 0dB = 1 V Input Short
Controls: Level, Tone, Distortion
Other Functions: Pedal SW, Check Indicator, Mode SW (OUT 2)
Jacks: Input Jack, Output Jacks 1 and 2, AC Adapter Jack |
Album by Daniel Wollock. Photos by Daniel Wollock. 1 - 2 of 2 Total. 1174 Visits. |
|
