homepage
An Overview Of The Various Types Of Vises
Vises, which are a standard mechanical device used to keep a piece of work stationary and is a key tool for many woodworking, metalworking, and other manufacturing applications. The bench vise (or workbench vice/vise) is attached directly to a workbench , and is used to hold the workpiece when it is employed for planning, sawing and drilling as well as other tasks. This article looks at the different kinds of vises. It also explains how vises function and what materials are utilized to create them.
Wood Working Vises
The bench vise is the most common type of vise used for woodworking. It is made up of many components. The components of the vise that are responsible for holding the workpiece are known as jaws. A set of jaws, one fixed and the other that is moving in a parallel fashion to each other is secured to the workpiece by the screw mechanism that is able to move one jaw towards one until they are able to fasten upon the workpiece. Jaws are typically made of wood, plastic, or metal, depending on the purpose. In case where you wish for a useful content about machine vice, check this site out.
A bench vise does not have to be attached to an workstation. As long as the surface is solid, the vise can be attached directly to the surface or to the side. Vises that are attached directly to the top of the surface have an swivel that allows the vise to turn according to the need. It is recommended to line the jaws of bench vises with jaws made of metal. Jaws can be easily replaced in the event that they wear out. Some bench vises can also function as an anvil. The strength, durability, and use of bench vises will vary depending on their purpose. Industrial operations are common uses for heavy-duty and medium-duty bench vises.
Heavy-Duty Bench Vises
Heavy-duty bench vises are frequently constructed from iron to ensure they are able to withstand more applications and frequent use often called vices for machinists. They include a precise slide bar made from serrated steel, as well as an ACME-threaded main screw. It is recommended to purchase fasteners, and the fasteners used to attach jaws to vises will often include another set of jaws that are to be fitted after the initial set becomes worn out. A standard bench vise made of heavy-duty can be stationary or feature the 360-degree swivel. Pipe jaw bench vises have an additional set of steel pipe jaws that be rotated 360 degrees and be replaced.
Medium Bench Vises for Heavy Duty
Medium-duty bench vises can be employed for many purposes. They are constructed of iron and feature removable steel jaws on top. They also have an swivel that rotates 360 degrees and a built-in anvil. Jaw faces can be switched between smooth and serrated sides, depending on the specific use.
Pipe Vises
Pipe vises are employed in plumbing to hold pipes or tubing secure while they're cut or threaded. They can accommodate pipes as small as 3 mm in diameter, or as big as 200 millimeters. They can be positioned on a bench, or use them with a mobile tripod. When working on projects outside of the workshop it is common to have a stand utilized. They fold up for transport, and sometimes two or more stand are employed for lengths of pipe that are long.
Chain Vises
To hold the pipe in place, chain vises are used to hold it in place. A chain clamps tightly around the pipe in order to hold it in position. Chains are typically made of high-tensile steel. The chain pipe vices are ideal for pipe shapes that are irregular and for other items. They have a wider working area and greater capacity than hinged vices. This is due to the fact that the vice's work area is restricted by the chain length. Because of its huge clamping surface, the pipe's entire circumference can be secured. But, locking a pipe in place with a chain pipe vice requires more time than other vise. This is because the chain is to be threaded with care between the jaws of the tool to secure the pipe in place.
Yoke Vises
Yoke vises, sometimes referred to as hinged vises, or jaw vices with adjustable jaws, employ screws to hold the pipe. The pipe is secured with a fixed lower jaw and the upper jaw is mobile. For a better grip the jaws both have serrations. The workpiece is situated on the stationary jaw before the moving jaw is lower with a screw and pressure exerted. A tommy-bar turns the screw to alter the space between the jaws of the vice. Yoke vices can be fixed to a workbench or a tripod stand, and are typically constructed from cast iron.
Metalworking Vises
Vises for metalworking are also referred to as engineer's vises. They are used to hold metal parts in place instead of making use of wood to cut or file them. The vises can be constructed of cast steel, but they are mostly made of cast iron. A few have a cast-iron body and channel bars made from steel. Cast iron is a cheap sturdy, hard, and durable material. Jaws are generally a separate part so they can be replaced. Protect delicate work by covering them with soft jaws made from aluminum, copper or wood. These covers are usually bolted to a bench and the jaws are positioned just a little higher than the edge. The vises could also have a small anvil on the rear of their bodies and a majority have an swivel base. For more information about engineer's vises also known as machinist's vises, read our article here. |
Date(s): March 10, 2023. Album by Sampson Jadwiga. 0 Total. 0 Visits. |
|
