Photo 362 of 415, 1942 WC52 3/4 ton

The hood had been tweaked on one one the side hinge rod had come about a 1/3 of the way out and was all bent up. here is how I clean the hinge up and make sure they are aligned correctly. A round file is just the right size so work it back and forth and blow with air to clean. If it gets tight, work it with a pair of Vise grips till it slips through. This cleans them and makes sure they are in alignment.

	sec delay
The hood had been tweaked on one one the side hinge rod had come about a 1/3 of the way out and was all bent up. here is how I clean the hinge up and make sure they are aligned correctly. A round file is just the right size so work it back and forth and blow with air to clean. If it gets tight, work it with a pair of Vise grips till it slips through. This cleans them and makes sure they are in alignment.
Full EXIF / IPTC Photo 362 of 415, MVC-013S_13.JPG, 39KB, 640x480, 66 Hits Other Sizes: Original Medium Large
Properties \| Link	Back to Thumbnails