In looking at the pump they were using a heavy wire for tension of the belt. Figured the adjustment slide bolt was twisted off as it was so dirty it was flush. Once I cleaned it I found it was open. I then thought it was stripped but when I put a bolt in it I found it's fine. Odd to me but it'll make this a lot easier. My finger is pointing at the adjustment bolt hole. | |
Full EXIF / IPTC Photo 311 of 415, MVC-004S_18.JPG, 43KB, 640x480, 69 Hits Other Sizes: Original Medium Large | |
Properties | Link | Back to Thumbnails |