Photo 211 of 415, 1942 WC52 3/4 ton

Next is to make the shoulder stop for the handle. This is what will keep the spring in place and let it have constant tension. I drill it to .375 so the shaft will slip through and turn the OD to a press fit for the handle.

	sec delay
Next is to make the shoulder stop for the handle. This is what will keep the spring in place and let it have constant tension. I drill it to .375 so the shaft will slip through and turn the OD to a press fit for the handle.
Full EXIF / IPTC Photo 211 of 415, MVC-026S_2.JPG, 48KB, 640x480, 65 Hits Other Sizes: Original Medium Large
Properties \| Link	Back to Thumbnails