Photo 194 of 415, 1942 WC52 3/4 ton

I need flat bottom holes. First I drill the hole to the depth. This is the tapered cobore and the small end is .875. If you don't have an expensive flat bottom reamer you can use an old junk/broken/short bit. Just cut it off square. This is another .875.

	sec delay
I need flat bottom holes. First I drill the hole to the depth. This is the tapered cobore and the small end is .875. If you don't have an expensive flat bottom reamer you can use an old junk/broken/short bit. Just cut it off square. This is another .875.
Full EXIF / IPTC Photo 194 of 415, MVC-008S_10.JPG, 36KB, 640x480, 55 Hits Other Sizes: Original Medium Large
Properties \| Link	Back to Thumbnails