Photo 163 of 415, 1942 WC52 3/4 ton

Kind of unrelated but here is a trick you can do with a surface grinder if you want holes every 90 degrees. Lay the vise on the side and clamp the piece on the chuck as well. I grind a flat so I know where the center is on the round part, turn it 90 degrees and do the same.

	sec delay
Kind of unrelated but here is a trick you can do with a surface grinder if you want holes every 90 degrees. Lay the vise on the side and clamp the piece on the chuck as well. I grind a flat so I know where the center is on the round part, turn it 90 degrees and do the same.
Full EXIF / IPTC Photo 163 of 415, MVC-014S_5.JPG, 41KB, 640x480, 63 Hits Other Sizes: Original Medium Large
Properties \| Link	Back to Thumbnails