Photo 14 of 26, Tire jack/spinner

To hold the roller in I welded a tab with a hole for the center to slide in. I want to be able to take it off if need, so on the other end I needed to have a mounting surface. I cut up a 1/2" scrap and pushed it into the end of the tube.

	sec delay
To hold the roller in I welded a tab with a hole for the center to slide in. I want to be able to take it off if need, so on the other end I needed to have a mounting surface. I cut up a 1/2" scrap and pushed it into the end of the tube.
Canon EOS Digital Rebel Xti Full EXIF / IPTC Photo 14 of 26, IMG_5204.JPG, 45KB, 640x426, 39 Hits Other Sizes: Medium Large Original
Properties \| Link	Back to Thumbnails