16. Re mount your steering wheel/shaft/column in the dash bracket. The far end of the steering shaft in re-inserted into the Universal Joint on the Saginaw Steering box. Put a GRADE 8 .2500 bolt through the Universal joint/steering shaft, then put the angle bracket (as shown in the picture) and tighten with a GRADE 8 Locking nut.
17. Once again a final test, re do the test in step 15. If all is well your ready for final connection to your horn.
18. Take the wire from the horn button that comes down the inside of the steering shaft, bring it out through an opening in the Universal and solder it to the wire coming from the brush or the brush holder. The other wire (blue in the pictures) goes to your horn. A positive wire either 6 or 12 volts (depending on your truck) goes to the other connector on your horn.
17. Once again a final test, re do the test in step 15. If all is well your ready for final connection to your horn.
18. Take the wire from the horn button that comes down the inside of the steering shaft, bring it out through an opening in the Universal and solder it to the wire coming from the brush or the brush holder. The other wire (blue in the pictures) goes to your horn. A positive wire either 6 or 12 volts (depending on your truck) goes to the other connector on your horn.
Other Sizes: Medium