Photo 166 of 415, 1942 WC52 3/4 ton

The piece I need is actually bigger than 1/2 so I drilled on hole to size. Then I rolled it around and marked the centerline of the other pin. I rolled it in the vise to an eyeball and then use the grinder to verify it was correct before drilling.

	sec delay
The piece I need is actually bigger than 1/2 so I drilled on hole to size. Then I rolled it around and marked the centerline of the other pin. I rolled it in the vise to an eyeball and then use the grinder to verify it was correct before drilling. Add Comment (0 total)
Full EXIF / IPTC Photo 166 of 415, MVC-019S_2.JPG, 33KB, 640x480, 64 Hits Other Sizes: Original Medium Large
Properties \| Link	Back to Thumbnails