FYI: Ch6 Center Freq = 85 MHz so 1/2-WL = 69.43-in.
##################################### a) Ch6 Tri-Folded [Bottom Fed] Dipole with "best" Dimensions for 600-ohm Load determined using nikiml's Python Optimization Scrips, presuming AWG10 [for a typical indoor/attic location]:
L2=65.59-in = Folded Dipole Overall Element Length.
Ch6 (82-88 MHz) Raw Gain = 2.1 to 2.2 dBi and SWR (600-ohms) = 1.2 to 1.6. SWR (300-ohms) = 1.7 to 1.2 to 2.6 is also Acceptable...[and can reduce if add Reflector].
##################################### b) Ch6 Tri-Folded [Bottom Fed] Dipole with "best" Dimensions for 300-ohm Load determined using nikiml's Python Optimization Scrips, presuming AWG10 [for a typical indoor/attic location]:
L2=63.61-in = Folded Dipole Overall Element Length.
Ch6 (82-88 MHz) Raw Gain = 2.1 to 2.2 dBi and SWR (300-ohms) = 1.9 to 1.7 to 2.0.
##################################### d) Ch6 Tri-Folded [Center Fed] Dipole with "best" Dimensions determined using nikiml's Python Optimization Scrips, presuming AWG10 for an indoor/attic location:
L2=62.23-in = Folded Dipole Overall Element Length.
Ch6 (82-88 MHz) Raw Gain = 2.1 to 2.2 dBi and SWR (1200-ohms) = 1.2 to 1.4.
.
Date(s): 9 May 2018. Album by holl_ands. 1 - 43 of 43 Total. 1126 Visits.
enlarge 56KB, 1152x651 1 Ch6 Tri-Folded Dipole - OPT for 600-ohm [BOTTOM FED] 3D View