Hi-VHF+UHF 2-Bay Bowtie (RL-M2, No Reflector) plus Hi-VHF Rectangular Loop Resonator analyzed using 4nec2. Adding Hi-VHF Resonator Loop reduced Hi-VHF SWR to ACCEPTABLE level, plus somewhat higher Gain.
For comparison, WITHOUT the Loop, M2 (10.0x9.5) 2-Bay Bowtie (NO Reflector) provides UHF Gain of 5.7 to 9.7 dBi with SWR Under 3.2 and Hi-VHF Gain of 2.0 to 2.5 dBi, but SWR = 13-7 is EXCESSIVE.
Two versions were analyzed (ALL using AWG10 Wire Size):
a) mclapp M2 (9.5x9.0) 2-Bay plus Rectangular Loop, with Loop in the same plane and always OUTSIDE the 2-Bay.
UHF Raw Gain = 5.7 to 9.3 dBi [DECREASE of 0.0 to 0.4 dB] and SWR (300-ohms) Under 2.8 [EXCELLENT]. Hi-VHF Raw Gain = 3.4 to 3.5 dBi [INCREASE of 1.4 to 1.0 dB] and SWR (300-ohms) Under 4.0 [FAIR] [Versus 13 to 7 without Loop].
######################################################################### b) mclapp M2 (10.0x9.5) sized 2-Bay plus Rectangular Loop, with Loop Offset 0.5-in from 2-Bay to prevent overlap collisions.
UHF Raw Gain = 4.9 to 9.3 to 9.2 dBi FORWARD [DECREASE of 0.8 to 0.4 dB] and Raw Gain = 5.0 to 8.7 to 8.4 dBi TO REAR with SWR (300-ohms) under 3.1 [GOOD]. Hi-VHF Raw Gain = 3.8 dBi [INCREASE of 1.8 to 1.3 dB] with SWR (300-ohms) under 2.6 [EXCELLENT].
Date(s): 27 Jan 2015. Album by holl_ands. 1 - 39 of 39 Total. 4181 Visits.
enlarge 276KB, 970x1024 2 M2 (9.5x9.0) 2-Bay + Rectangular Loop Front View - 2-Bay & Loop in SAME Plane Loop is about 21.0-in H x 21.0-in W Feedline Separation is 1.5-in Tine Separation is 5.0-in [1 large square = 2.5 inches]
enlarge 282KB, 1015x1024 20 M2 (10.0x9.5) 2-Bay + Rect. Loop Offset=0.5-in Front View - 0.5-in Between 2-Bay & Loop Loop is about 21.75-in H x 20.0-in W Feedline Separation is 1.5-in Tine Separation is 5.0-in [1 large square = 2.5 inches]
enlarge 87KB, 335x1024 21 M2 (10.0x9.5) 2-Bay + Rect. Loop Offset=0.5-in Top View [1 large square = 2.5 inches]
enlarge 149KB, 1024x741 22 M2 (10.0x9.5) 2-Bay + Rect. Loop Offset=0.5-in UHF Raw Gain = 4.9 to 9.3 to 9.2 dBi FORWARD
enlarge 178KB, 1024x741 23 M2 (10.0x9.5) 2-Bay + Rect. Loop Offset=0.5-in UHF Raw Gain = 5.0 to 8.7 to 8.4 dBi TO REAR UHF F/B & F/R Up to 0.8 dB due to Offset=0.5-in