PrevNext 
PDF PDF needs to be opened
Open this PDF (1.26MB)
Programming instructions for the iDirect 5000 series satellite modem using iSite software. Note: Best to use Windows XP with service pack 3 installed or the iSite software might not work.

You also need a serial cable to communicate between a laptop and the console port on the satellite modem to determine the modems IP address which will be used with iSite to program the unit. For laptops without a serial port use a USB to serial adapter with DB9 connector on the end of the cable, then attach a Cisco serial port cable to the DB9 and jack the RJ-45 connector on the end of that cable into the RJ-45 receptacle console port on the back of the satellite modem.

If you already know the IP address of the iDirect modem you don't need to do this and can use a Cat. 5 cable and your computers LAN port between any of the iDirect modems 8 LAN ports on the rear of the unit to communicate with the modem using iSite. Due to auto sensing either a strait through or null cable should work but I used a null cable.
Edit
Some files and photos may be copyright owned.
Photo 7 of 10, iDirect Infinity Log On Details.pdf, 1.26MB, 452x640
Other Sizes: Medium Original
Properties | Link Back to Thumbnails