Album by Joe Cimoch. 1 - 7 of 7 Total. 2146 Visits.
1 This measurement is made by laying a straight edge on the edge of the cowl vent(as flat as possible on the cab) to the farthest edge of the lip that the hood lays on.
2 Military = 3/4 inch, Civilian 2wd = 1/4 inch. This is why the hood doesn't fit quite right when a civilian cab is used. The angle is NOT the same.
3 Shows the difference between the radiator support bar bracket.
4
5 Measuring from the exposed cab seam to the top of the hood latch catch that is riveted to the cab Military = 6 3/4, Civilian 2wd = 4 1/2 inches.
6
7 Standardized round gauges on a 215 series closed cab