Photo 405 of 452, My Studio

Unfinished ring on the side is going to be an open top box ring (these are made with an inner and outer ring with two sides, all soldered. I still have to hand saw the inside disk out, saw off the outside bottom plate, add the top plate, saw that off, add the stones, weave and solder the wire through weaving it so that the stones don't fall out. This one will be an open top, with loose stones, and a sterling wire woven top.

	sec delay
Unfinished ring on the side is going to be an open top box ring (these are made with an inner and outer ring with two sides, all soldered. I still have to hand saw the inside disk out, saw off the outside bottom plate, add the top plate, saw that off, add the stones, weave and solder the wire through weaving it so that the stones don't fall out. This one will be an open top, with loose stones, and a sterling wire woven top. Add Comment (0 total)
Copyright Starting Box Designs, Co. 1987-2017 Photo 405 of 452, oct21silveropenring.jpg, 0KB, x0, 0 Hits Other Sizes: Original Medium
	Back to Thumbnails