original swivel install in 47 frame

			• Public Gallery • Help

		• Join Now! • Log In • Feature Tour

original swivel install in 47 frame
Album by daniel mininger. Photos by dan. 1 - 97 of 97 Total. 1282 Visits.

1 back from blasting	2 back from blasting	3 back from blasting
4 back from blasting	5 back from blasting	6 back from blasting
7 back from blasting	8 back from blasting	9 back from blasting
10 installing an insert in front portion	11 putting in front crossmember	12 putting in front crossmember
13 cab height setting on swivel	14 gap is about 1 1/2 inches	15 test fit of cab setting on frame
16 gap, need to use 2 inch puck or cut cab	17 rear crossmember blasted	18 squareing swivel drivers side
19 squareing drivers side	20 drivers side square	21 squareing drivers side rear section
22 checking square/drivers side rear section	23 squareing passenger side rear section	24 passenger side front section
25 checking horizontal front and rear alignment	26 checking horizontal alignment	27 checking frame alignment
28 checking frame alignment drivers side	29 checking frame alignment passenger side	30 checking overall look
31 from the front	32 from the side	33 reattaching rear cab mount
34 rear cab mount	35 weld, and then weld some more	36 weld on front passenger side
37 multiple pass welds	38 multiple pass welds, stick for good penetration	39 bottom welds
40 bottom welds	41 cab mount, paint both surfaces before bolting on	42 rear section of frame
43 front bed mount	44 front bed mount welded on using original holes	45 front bed mount
46 original piece of frame swivel was removed from for comparison	47 piece of original frame for comparison	48 painted front shock area
49 painted	50 motor mount area	51 motor/master cylinder mount
52 master cylinder mount	53 rear axle bump pad	54 inside of frame
55 inside of frame insert note; running board bracket holes drilled	56 painted	57 painted
58	59	60
61	62	63
64	65	66
67	68	69
70	71	72
73 rear wheel 32 inches high	74	75
76	77 front wheel 32 inches high	78
79	80	81
82	83	84
85	86	87
88	89	90
91	92	93
94	95	96
97

Select All.

Sign the Guestbook. Displaying 1 of 1 entries.

Very nice Dave, reckon it'll be together for the rally? I've got the fairlead off the old truck. I cleaned it and found some more interesting stuff. I'll send along info with the drawings, which are done now. i've got lots of pictures to go along with the prints. I'm going to paint and mount the fairlead and get some pictures of it mounted to send to you. probably in two to three weeks, depending on our weather. (the paint does't do well with the humitiy at 98%) kssu Dave.
- Dave, Sun, 24 Jan 2010 8:37AM

Album Properties. Email Album. Send Invitation. Add to Website. Share URL