1
September 12, 2008 - 1958 FARGO Sweptside in its original colors....original colors of Sahara Beige and Cuban Red. Pictured at its first show in Elko, NV. Still a few details to complete such as headliner, dashboard knobs and interior door handles.
| 
2
The truck won "Best Stock 2wd Truck - 1950-1973".
| 
3
January 2009 - Tailgate letters painted.
| 
4
January 2009 - Hubcap centers painted.
|
5
| 
6
| 
7
| 
8
|
9
| 
10
| 
11
| 
12
Roof top antenna for factory original cab roof top mounted Model 700 radio. These totally correct reproduction antennas are offered by Eric Bannerman on Ebay.... his user ID is: townwagon
I must say they are excellent workmanship.
|
13
The interior material is as close as we could get to the original.
| 
14
| 
15
September 7, 2008 - Chris (middle son), showing his pride in our Fargo that is just about ready to go to the Gambler's Run in Elko NV this coming weekend.
| 
16
September 7, 2008 - Chris (middle son), showing his pride in our Fargo that is just about ready to go to the Gambler's Run in Elko NV this coming weekend.
|
17
September 7, 2008 - Chris (middle son), showing his pride in our Fargo that is just about ready to go to the Gambler's Run in Elko NV this coming weekend.
| 
18
September 7, 2008 - More trim and stainless installed.
| 
19
September 1, 2008 - New REPRO tailgate latch handle and slam latch installed.
| 
20
September 1, 2008 - Upper chrome and stainless trim attached on rear fenders. Awaiting additional trim clips for the lower trim.
|
21
September 1, 2008 - Upper chrome and stainless trim attached on rear fenders. Awaiting additional trim clips for the lower trim.
| 
22
September 1, 2008 - Newly re-anodized hood side trim and NOS "100" emblems now installed.
| 
23
September 1, 2008 - New REPRO hood ornament and newly rechromed hood letters now installed.
| 
24
September 1, 2008 - Headlight surrounds and NOS stainless trim now installed.
|
25
August 30, 2008 - Back to work on the 58 FARGO from Minot, ND. Now cut and buffed and intalling the wiring harness, bumpers, lights and chrome. Full front view with bumper guards clearly visible. The stainless trim around the headlights will be installed tomorrow. We are trying to finish this truck to take to a car show Sept 12th.
| 
26
August 30, 2008 - Back to work on the 58 FARGO from Minot, ND. Now cut and buffed and intalling the wiring harness, bumpers, lights and chrome. Awaiting installation of the stainless fender trims and badges.
| 
27
August 30, 2008 - Back to work on the 58 FARGO from Minot, ND. Now cut and buffed and intalling the wiring harness, bumpers, lights and chrome. Now with the surrounds installed.
| 
28
August 30, 2008 - Back to work on the 58 FARGO from Minot, ND. Now cut and buffed and intalling the wiring harness, bumpers, lights and chrome. Here are the restored headlight pods before putting on the surrounds.
|
29
June 15, 2008 - Hood mounted and trial fit of wheel trim rings and hubcap.
| 
30
June 15, 2008 - Hood mounted along with upper and lower grille pieces.
| 
31
December 2, 2007 - Front clip now mounted and ready for alignment and adjustment of door.
| 
32
December 2, 2007 - Front clip now mounted and ready for alignment and adjustment of door.
|
33
December 2, 2007 - Front clip now mounted and ready for alignment and adjustment of door.
| 
34
December 2, 2007 - Front clip now mounted and ready for alignment and adjustment of door.
| 
35
December 2, 2007 - Front clip now mounted and ready for alignment and adjustment of door.
| 
36
December 2, 2007 - Front clip now mounted and ready for alignment and adjustment of door.
|
37
December 2, 2007 - Front clip now mounted and ready for alignment and adjustment of door. Checking and adjusting fit of stainless trip on fenders and doors.
| 
38
December 2, 2007 - Front clip now mounted and ready for alignment and adjustment of door. Checking and adjusting fit of stainless trip on fenders and doors.
| 
39
November 28, 2007 - Newly installed steering column in Sandlewood color. Steering wheel is being restored and painted in same color.
| 
40
November 26, 2007 - Some of the new detail items on hand for the final phase of assembly. New reproduction dashboard knobs in correct Sandlewood color with black letters.
|
41
November 26, 2007 - Newly restored glove box lock in correct Sandlewood color.
| 
42
November 26, 2007 - Newly restored glove box lock in correct Sandlewood color.
| 
43
November 26, 2007 - Newly restored sun visor arms in correct Sandlewood color to go with the NOS sunvisors on hand.
| 
44
November 26, 2007 - Newly painted interior rear view mirror bracket to go with the NOS rear view mirror on hand.
|
45
November 26, 2007 - Newly repainted ash recieve (upside down), newly cad plated inside and restored pull handle.
| 
46
November 26, 2007 - Like new window winder and door handle escushions in correct Sandlewood color.
| 
47
November 26, 2007 - NOS hand brake mechanism with red adjustment grip at the end.
| 
48
November 12, 2007 - Top of NOS running boards that have been in someones parts inventory for 50 years... They are just about ready for the black paint.
|
49
November 12, 2007 - Bottom side of NOS running boards that have been in someones parts inventory for 50 years... They are just about ready for the black paint.
| 
50
November 20, 2007 - Railfins mounted and ready for final alignment. New front windshield and original rear window installed. Wheels are off the vehicle to be painted and waiting for new wide white wall radial tires.
| 
51
October 14, 2007 - All the oak bed wood and stainless strips are laid in to determine fit. Some minor adjustments in holes required for perfect fit before the are bolted down.
| 
52
October 14, 2007 - All the oak bed wood and stainless strips are laid in to determine fit. Some minor adjustments in holes required for perfect fit before the are bolted down.
|
53
October 14, 2007 - All the oak bed wood and stainless strips are laid in to determine fit. Some minor adjustments in holes required for perfect fit before the are bolted down.
| 
54
September 30, 2007 - The bed is initially mounted on the chassis. A couple pieces of the finished oak wood for the bed is laid in to see how it looks.
| 
55
September 30, 2007 - The bed is initially mounted on the chassis. Chris admiring the progress so far.
| 
56
September 30, 2007 - The bed is initially mounted on the chassis.
|
57
September 30, 2007 - The bed is initially mounted on the chassis. Some of the wood is laid in to check out what it will look like.
| 
58
September 28, 2007 - Newly painted cab mounted on previously prepared rolling chassis.
| 
59
September 28, 2007 - Newly painted cab mounted on previously prepared rolling chassis. Previously painted front clip sitting on rear of frame.
| 
60
September 3, 2007 - Chris proudly displaying the body just stripped of masking after todays application of Cuban Red paint.
|
61
September 3, 2007 - The body just stripped of masking after todays application of Cuban Red paint. This paint pattern is the correct and original pattern used on the Canadian Fargo and Dodge Trucks for 1958.
| 
62
September 3, 2007 - The body just stripped of masking after todays application of Cuban Red paint. The Canadian produced Fargo and Dodge trucks were also made in the reverse color scheme, where the lighter colors are on the upper and lower portions and the darker color is in the middle.
| 
63
September 3, 2007 - The body just stripped of masking after todays application of Cuban Red paint.
| 
64
September 3, 2007 - The body just stripped of masking after todays application of Cuban Red paint.
|
65
September 3, 2007 - The body just stripped of masking after todays application of Cuban Red paint.
| 
66
September 3, 2007 - The body just stripped of masking after todays application of Cuban Red paint.
| 
67
September 3, 2007 - The body just stripped of masking after todays application of Cuban Red paint.
| 
68
September 3, 2007 - The body just stripped of masking after todays application of Cuban Red paint.
|
69
September 3, 2007 - The body just stripped of masking after todays application of Cuban Red paint.
| 
70
December 2006 - After many many hours of blocking the tailfins, they are finally painted Sahara Beige and Cuban Red two tone. Ready for mounting on the bed.
| 
71
December 2006 - Tailfins painted Sahara Beige and Cuban Red two tone. Ready for mounting on the bed.
| 
72
December 2006 - Tailfins painted Sahara Beige and Cuban Red two tone. Ready for mounting on the bed.
|
73
December 2006 - Tailfins painted Sahara Beige and Cuban Red two tone. Ready for mounting on the bed.
| 
74
December 2006 - Tailfins painted Sahara Beige and Cuban Red two tone. Ready for mounting on the bed.
| 
75
December 2006 - Tailfins painted Sahara Beige and Cuban Red two tone. Ready for mounting on the bed.
| 
76
December 19, 2005 - Some of the recently rechromed badges and newly polished stainless steel mounted (temporarily) on the front clip... just to see how nice it will look when completed.
|
77
December 19, 2005 - Some of the recently rechromed badges and newly polished stainless steel mounted (temporarily) on the front clip... just to see how nice it will look when completed.
| 
78
December 19, 2005 - Some of the recently rechromed badges and newly polished stainless steel mounted (temporarily) on the front clip... just to see how nice it will look when completed.
| 
79
December 18, 2005 - Front clip painted Sahara Beige and Cuban Red. Chris proudly displays his workmanship.
| 
80
December 18, 2005 - Front clip painted Sahara Beige and Cuban Red.
|
81
December 18, 2005 - Front clip painted Sahara Beige and Cuban Red. Note the center section behind the grille and adjacent to the radiator is correctly painted black.
| 
82
December 18, 2005 - Front clip painted Sahara Beige and Cuban Red.
| 
83
December 18, 2005 - Front clip painted Sahara Beige and Cuban Red.
| 
84
December 18, 2005 - Front clip painted Sahara Beige and Cuban Red. Note the underside of front fenders painted red as original.
|
85
December 18, 2005 - Front clip painted Sahara Beige and Cuban Red.
| 
86
December 18, 2005 - Front clip painted Sahara Beige and Cuban Red. Chris again proudly showing off his work.
| 
87
August 15, 2005 - Five newly rebuilt FARGO 15 inch wheels, with correct setback and new hubcap clips. These were done by Stockton Wheel in Stockton, CA.
| 
88
August 15, 2005 - Five newly rebuilt FARGO 15 inch wheels, with correct setback and new hubcap clips. These were done by Stockton Wheel in Stockton, CA.
|
89
August 15, 2005 - Five newly rebuilt FARGO 15 inch wheels, with correct setback and new hubcap clips. These were done by Stockton Wheel in Stockton, CA. This shot is with one of the newly restored FARGO hubcaps (yet unpainted) mounted without stainless trim ring.
| 
90
August 15, 2005 - Five newly rebuilt FARGO 15 inch wheels, with correct setback and new hubcap clips. These were done by Stockton Wheel in Stockton, CA. This shot is with one of the newly restored FARGO hubcaps (yet unpainted) mounted WITH stainless trim ring, which still requires straightening and polishing.
| 
91
June 10, 2005 - Fargo emblems (potmetal) back from restoration and rechroming.... They look better than new!!
| 
92
September 21, 2004 - Potmetal Fargo emblems off to the chrome shope to be rechromed. Will add other potmetal chrome pictures later.
|
93
June 10, 2005 - Hubcaps back from restoration and rechroming.... Awesome!! They still need the navy blue background painted.
| 
94
June 10, 2005 - Close-up of hubcaps back from restoration and rechroming.... Awesome!! Center of circle around the map and the letters yet to be painted dark blue.
| 
95
June 10, 2005 - Rear view of hubcaps back from restoration and rechroming.... Awesome!!
| 
96
February 1, 2005 - Hubcaps sent to restorer. 5 were sent with instructions to do the 4 best ones. They will remove the outer shell, straighten and removed dings & dents, then triple plate the shell, nickle plate the inner cap and re-intall the outer shell over the inner cap. They should be back about mid-April.
|
97
February 1, 2005 - A closer picture of the best of the 5 caps sent out for restoration. This is the correct paint pattern for the caps.
| 
98
June 1, 2005 - Dashboard face panels back from being restored, bright dipped and anodized. Bottom one is for driver side with instruments and top on is for passenger side.
| 
99
June 1, 2005 - Dashboard face panel back from being restored, bright dipped and anodized. This fits the ignition, heater blower and wiper switches on the lower center of dashboard.
| 
100
June 1, 2005 - Hood side panels back from being restored, bright dipped and anodized. The ends with the two holes in them get the <100> emblem mounted on them.
|
101
June 1, 2005 - Instrucments after disassembly, repairing, cleaning, painting and re-assembly. Now ready for installation.
| 
102
Assembled Tail Light assemblys with new lenses and new reflectors. This vehicle had backup lights as can be seen in the lower lenses.
| 
103
Assembled Tail Light assemblys with new lenses and new reflectors. This vehicle had backup lights as can be seen in the lower lenses.
| 
104
June 1, 2005 - Tail light stainless steel backing panel back from being polished.
|
105
June 1, 2005 - Sample of various other stainless steel pieces back from being straightened and polished.
| 
106
June 1, 2005 - Stainless steel license plate light bezels back from being straightened and polished.
| 
107
June 4, 2005 - Tailgate painted Sahara Beige. Ready for cut and buffing.
| 
108
June 4, 2005 - Hood painted Sahara Beige. Ready for cut and buffing.
|
109
May 11, 2005 - Newly recored and rebuilt radiator ready for installation.
| 
110
May 8, 2005 - Chris applying last of 4 coats of Sahara Beige to the bed.
| 
111
May 7, 2005 - Chris doing final blocking and sanding on bed prior to paint.
| 
112
April 22, 2005 - Greg working on the front brakes. Note newly cad plated lug bolts.
|
113
April 22, 2005 - Greg working on the front brakes.
| 
114
April 22, 2005 - Greg working on the front brakes.
| 
115
April 22, 2005 - Front brakes done. Note newly cad plated lub bolts.
| 
116
April 22, 2005 - Working on the front brakes.
|
117
April 22, 2005 - Rear brakes done.
| 
118
March 27, 2005 - We now have a rolling chassis. Rear view.
| 
119
March 27, 2005 - We now have a rolling chassis. Rear view.
| 
120
March 27, 2005 - We now have a rolling chassis. Front view.
|
121
March 27, 2005 - We now have a rolling chassis. Front view.
| 
122
March 30, 2005 - Engine installed in chassis.
| 
123
March 30, 2005 - Engine installed in chassis.
| 
124
April 3, 2005 - Closeup view of 313 V8 timing cover and water pump.... significantly different than a 318 V8.
|
125
April 3, 2005 - Closeup view of 313 V8 timing cover and water pump.... significantly different than a 318 V8.
| 
126
April 3, 2005 - Closeup view of 313 V8 timing cover and water pump.... significantly different than a 318 V8. Notice the grease zert.
| 
127
March 21, 2005 - Newly rebuilt rear leaf springs installed on frame with new spring bolts and new shackles.
| 
128
March 21, 2005 - Newly rebuilt rear leaf springs installed on frame with new spring bolts and new shackles.
|
129
March 21, 2005 - Newly rebuilt front leaf springs installed on frame with new spring bolts and new shackles.
| 
130
March 21, 2005 - Newly rebuilt front leaf springs installed on frame with new spring bolts and new shackles.
| 
131
March 20, 2005 - New clutch installed, with bellhousing and newly rebuilt transmission mounted on engine.
| 
132
March 7, 2005 - Tail main shaft re-installed with new low to reverse slider and new front and rear bearings.
|
133
March 7, 2005 - New front tailshaft bearing installed and ready for installation of the tail main shaft.
| 
134
March 7, 2005 - Found low gear on the cluster with chipped teeth on the leading edge. We have a new cluster gear to replace it.
| 
135
March 7, 2005 - Found the low to reverse slider gear with chipped teeth on the leading edge. We have a new one to replace it.
| 
136
March 6, 2005 - Getting ready to open and inspect the 3-speed manual transmission. Beginning to break it open for inspection.
|
137
March 6, 2005 - Getting ready to open and inspect the 3-speed manual transmission. Right Side View.
| 
138
March 6, 2005 - Getting ready to open and inspect the 3-speed manual transmission. Left Rear View.
| 
139
March 6, 2005 - Getting ready to open and inspect the 3-speed manual transmission. Right Rear View.
| 
140
March 6, 2005 - Getting ready to open and inspect the 3-speed manual transmission. Left Side View.
|
141
March 6, 2005 - Getting ready to open and inspect the 3-speed manual transmission. Front View.
| 
142
April 21, 2005 - Front bumper guards returned from chroming shop.... they are beautiful!
| 
143
April 21, 2005 - Front bumper guards returned from chroming shop.... they are beautiful!
| 
144
February 20, 2005 - Very rare items indeed... 1958-1960 frond bumper guards. These are stripped and ready for new chrome plating.
|
145
February 20, 2005 - Newly painted floorboard hump cover and bed cross supports ready for installation.
| 
146
February 20, 2005 - One group of NOS parts ready for installation. Cab mounts, door handles, windshield wipers, bumper step pads, gas tank fuel level sensor, courtesy light lense, emergency brake band, gas cap, headlight dimmer, gas filler neck grommet, gas pedal, clutch arm boot, heater switch, headlight switch, ignition switch and license plate lite lenses.
| 
147
February 20, 2005 - Another group of NOS, rechromed or repainted parts ready for installation. Sun visors, horn, tail light reflectors & bezels, emergency brake cable, horn relay, grille and tail light chrome pieces and tailfin side pieces.
| 
148
February 13, 2005 - Fargo 313 V8 with reground (.010/.010) crank sitting in block ready for main caps.
|
149
February 13, 2005 - Fargo 313 V8 with reground (.010/.010) crank sitting in block with main caps installed and torqued.
| 
150
February 13, 2005 - Fargo 313 V8 with new rod bearings, rings, rebuilt rods and new pistons (318 +.020) installed.
| 
151
February 13, 2005 - Fargo 313 V8 with rebuilt heads installed. Valves ground, new valve guides and hardened valve seats installed.
| 
152
February 13, 2005 - Fargo 313 V8 with all but the oil pan installed.
|
153
February 13, 2005 - Fargo 313 V8 with all but the oil pan installed. Engine is painted to correct colors accord to Fargo literature on hand.
| 
154
February 13, 2005 - Fargo 313 V8 showing the Canadian engine number.... in a different location and different coding that US Dodges of the same year.
| 
155
February 10, 2005 - 313 V8 engine bare block back from the engine machine shop, now painted and ready for assembly with all new parts.
| 
156
February 10, 2005 - 313 V8 engine bare block back from the engine machine shop, now painted and ready for assembly with all new parts.
|
157
February 10, 2005 - 313 V8 engine bare block back from the engine machine shop, now painted and ready for assembly with all new parts. Close up of correct engine number for this truck.
| 
158
1958 Fargo Sweptside - 313 V8 wide block engine prior to removal and rebuilding. The 313 looks like the US 318 wide block. The 313 was used in the 58 Fargo's whereas the Dodge 315 (a different styled engine) was used in the 58 Dodge's.
| 
159
February 9, 2005 - First coat of POR-15 is on all sides of the frame.
| 
160
February 9, 2005 - First coat of POR-15 is on all sides of the frame.
|
161
February 9, 2005 - First coat of POR-15 is on all sides of the frame.
| 
162
February 9, 2005 - First coat of POR-15 is on all sides of the frame.
| 
163
February 6, 2005 - Frame torn down to last nut and bolt. Just about ready for POR-15 application.
| 
164
February 6, 2005 - Cross members etc from torn down fram. Just about ready for POR-15 application.
|
165
February 6, 2005 - Front axel stripped and ready for new King Pins before being covered with POR-15 rust prevention.
| 
166
February 6, 2005 - Front and rear leaf springs ready to go to the rebuilder.
| 
167
February 3, 2005 - Frame back from the sandblaster. It really came out clean and smooth.
| 
168
February 3, 2005 - Frame back from the sandblaster. It really came out clean and smooth.
|
169
February 3, 2005 - Frame back from the sandblaster. It really came out clean and smooth.
| 
170
February 3, 2005 - Frame back from the sandblaster. It really came out clean and smooth.
| 
171
February 3, 2005 - Frame back from the sandblaster. It really came out clean and smooth.
| 
172
January 29, 2005 - Front clip blocked and sealed and ready for application of Sahara Beige paint. Red will be painted later over correct area of front clip, covering portions of the Sahara Beige as done at the factory.
|
173
January 29, 2005 - Front clip blocked and sealed and ready for application of Sahara Beige paint. Red will be painted later over correct area of front clip, covering portions of the Sahara Beige as done at the factory.
| 
174
January 29, 2005 - Front clip blocked and sealed and ready for application of Sahara Beige paint. Red will be painted later over correct area of front clip, covering portions of the Sahara Beige as done at the factory.
| 
175
January 29, 2005 - Front clip blocked and sealed and ready for application of Sahara Beige paint. Red will be painted later over correct area of front clip, covering portions of the Sahara Beige as done at the factory.
| 
176
January 1, 2005 - New oak bed wood with seven coats of marine spar varnish on all sides.
|
177
January 1, 2005 - New oak bed wood with seven coats of marine spar varnish on all sides.
| 
178
January 1, 2005 - Newly painted inner fender in black.
| 
179
January 1, 2005 - Newly painted inner fender in black.
| 
180
January 1, 2005 - Newly painted inner fender in black.
|
181
January 1, 2005 - Newly painted floor pan in black.
| 
182
January 1, 2005 - Engine oil bath air cleaner ready for installation.
| 
183
December 31, 2004 - Fargo cab primered and now being sanded and blocked.
| 
184
December 31, 2004 - Fargo cab primered and now being sanded and blocked.
|
185
December 30, 2004 - Fargo cab primered and now being sanded and blocked.
| 
186
December 30, 2004 - Fargo cab primered and now being sanded and blocked.
| 
187
December 30, 2004 - Fargo cab primered and now being sanded and blocked. Even getting the bottom of the cab.
| 
188
December 30, 2004 - Fargo cab primered and now being sanded and blocked. You can see the hold in the roof where the original roof mounted Model 700 radio antenna comes through.
|
189
December 30, 2004 - Fargo hood primered and now being sanded and blocked.
| 
190
December 30, 2004 - Fargo bed during the initial remounting and adjusting of the tailfins. The tailfins and bed will now be sanded and blocked. Driver side.
| 
191
December 30, 2004 - Fargo bed during the initial remounting and adjusting of the tailfins. The tailfins and bed will now be sanded and blocked. Passenger side.
| 
192
December 30, 2004 - Fargo bed during the initial remounting and adjusting of the tailfins. The tailfins and bed will now be sanded and blocked. Rear driver side.
|
193
December 30, 2004 - Fargo bed during the initial remounting and adjusting of the tailfins. The tailfins and bed will now be sanded and blocked. Rear passenger side.
| 
194
December 30, 2004 - Fargo bed during the initial remounting and adjusting of the tailfins. The tailfins and bed will now be sanded and blocked. From the rear without the tailgate mounted.
| 
195
November 2004 - Sanding and blocking tailfins.
| 
196
November 2004 - Sanding and blocking tailfins.
|
197
October 2004 - Passenger side tailfin with new patch panels installed. Another view.
| 
198
October 2004 - Driver side tailfin with new patch panels installed.
| 
199
October 2004 - Driver side tailfin with new patch panels installed. Another view. In this picture you can see the orginal gas filler opening on the tailfins when Mopar used them on station wagons.
| 
200
October 2004 - Tailfin showing work required around the lip of the wheel openings.
|
201
October 2004 - Tailfin with new patch panels installed. This picture shows the original addtional lead seam where the Special Equipment Group (SEG) added aprox 6 inches to station wagon tailfins to fit them to the Sweptsides.
| 
202
October 2004 - A closer view of the SEG installed panel to lenthen the tailfins.
| 
203
October 2004 - Small patch panel installed on bottom of rear tailfin.
| 
204
October 2004 - Small patch panel installed on bottom of rear tailfin.
|
205
October 2004 - Small patch panel installed on bottom of rear tailfin.
| 
206
October 2004 - Small patch panel installed on top side of rear tailfin.
| 
207
October 2004 - Small patch panel installed on bottom of rear tailfin.
| 
208
October 2004 - Repairing a rear fender lip.
|
209
October 2004 - Repairing a rear fender lip.
| 
210
Sept 17, 2004 - Parts of the 1958 Fargo Sweptside come back from sandblasting and look great. Ready for a small amount of minor bodywork.
| 
211
Sept 17, 2004 - Parts of the 1958 Fargo Sweptside come back from sandblasting and look great.
| 
212
Sept 17, 2004 - Parts of the 1958 Fargo Sweptside come back from sandblasting and look great.
|
213
1958 Fargo Sweptside - October 2003. Front view while still on the trailer from Minot, ND. This vehicle had been sitting there in Minot for the past several decades.
| 
214
1958 Fargo Sweptside - October 2003. Driver front qaurter view.
| 
215
1958 Fargo Sweptside - October 2003. Driver side view.
| 
216
1958 Fargo Sweptside - October 2003. Driver rear quarter view.
|
217
1958 Fargo Sweptside - October 2003. Driver rear view.
| 
218
1958 Fargo Sweptside - October 2003. Rear view of tailgate with FARGO name.
| 
219
1958 Fargo Sweptside - October 2003. Passenger rear view.
| 
220
1958 Fargo Sweptside - October 2003. Passenger side view.
|
221
1958 Fargo Sweptside - October 2003. Passenger front view.
| 
222
1958 Fargo Sweptside - October 2003. Passenger front view with FARGO logo on front fenders.
| 
223
1958 Fargo Sweptside - October 2003. Hood in the bed with FARGO logo.
| 
224
1958 Fargo Sweptside - October 2003. Passenger door showing rust situation. Definitely needs new doors. They are the only serious rust on the vehicle other than the tailfins.
|
225
1958 Fargo Sweptside - October 2003. Interior view with rear window on seat.
| 
226
1958 Fargo Sweptside - October 2003. Another interior view.
| 
227
1958 Fargo Sweptside - October 2003. Another interior view.
| 
228
1958 Fargo Sweptside - October 2003. Another interior view of roof showing hole where the Model 700 radio was mounted. We have one on hand that will be re-installed.
|
229
1958 Fargo Sweptside - October 2003. View of under hood body tag.
| 
230
1958 Fargo Sweptside - October 2003. View of tag on outside of bed header panel.
| 
231
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
232
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
|
233
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
234
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
235
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
236
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
|
237
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
238
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
239
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
240
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
|
241
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
242
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
243
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
244
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
|
245
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
246
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
247
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
248
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
|
249
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
250
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
251
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
252
1958 Fargo Sweptside - October 2003. Close-up of Dodge Red and Sahara Beige original colors of vehicle.
|
253
1958 Fargo Sweptside - October 2003. Docunenting painting patterns specific to 1958 Fargo's.
| 
254
1958 Fargo Sweptside - October 2003. Docunenting riveting of stainless windshield trim before removal.
| 
255
1958 Fargo Sweptside - October 2003. Doors and preparing to remove the front clip.
| 
256
1958 Fargo Sweptside - February 22, 2003. Doors off and preparing to remove the front clip.
|
257
1958 Fargo Sweptside - October 2003. Doors off and preparing to remove the front clip.
| 
258
1958 Fargo Sweptside - October 2003. Doors off and preparing to remove the front clip.
| 
259
1958 Fargo Sweptside - October 2003. Doors off and preparing to remove the front clip.
| 
260
1958 Fargo Sweptside - October 2003. Doors off and preparing to remove the front clip.
|
261
1958 Fargo Sweptside - October 2003. Front clip removed.
| 
262
1958 Fargo Sweptside - October 2003. Front clip removed.
| 
263
1958 Fargo Sweptside - October 2003. Front clip after removal.
| 
264
1958 Fargo Sweptside - October 2003. Bed and tailfins on frame after removal of front clip and cab.
|
265
1958 Fargo Sweptside - October 2003. Cab after removal.
| 
266
1958 Fargo Sweptside - October 2003. Cab after removal.
| 
267
1958 Fargo Sweptside - October 2003. Cab after removal.
| 
268
1958 Fargo Sweptside - As found in the snow in Minot, ND in 2002.
|
269
1958 Fargo Sweptside - As found in the snow in Minot, ND in 2002.
| 
270
1958 Fargo Sweptside - As found in the snow in Minot, ND in 2002. Hood is in the bed of the truck.
| 
271
Newly created to correct original specification, Model 700 rooftop radio attenna. Offered by Eric Bannerman...TOWNWAGON used ID on Ebay. Very Very Nice!!
| 
272
Newly created to correct original specification, Model 700 rooftop radio attenna. Offered by Eric Bannerman...TOWNWAGON used ID on Ebay. Very Very Nice!!
|
273
Newly created to correct original specification, Model 700 rooftop radio attenna. Offered by Eric Bannerman...TOWNWAGON used ID on Ebay. Very Very Nice!!
| 
274
Original condition of some of the potmetal pieces before rechroming.
| 
275
Original condition of some of the potmetal pieces before rechroming.
| 
276
More of the original condition of some of the potmetal pieces before rechroming.
|
277
Note the tags on starter, generator and distributor indicate they were made in Sarnia ONT Canada.
| |
