1967 wm300

			• Public Gallery • Help

		• Join Now! • Log In • Feature Tour

1967 wm300

TOTAL RESTORATION

Date(s): February 28, 2005. Album by rick bowman. 1 - 190 of 190 Total. 6329 Visits.

1	2	3	4
5	6	7	8
9	10	11 IM000063.JPG	12 DSC00009
13 DSC00010	14 DSC00011	15 DSC00012	16 DSC00013
17 DSC00014	18 DSC00005	19 DSC00007	20 DSC00004
21 DSC00006	22 DSC00008	23	24 200 lbs of extra steel to make a home made plow frame.
25	26	27	28
29	30	31	32
33	34	35 rear fenderas, lots of paint but no rust	36
37	38	39 bed, all banged up but no rust, sand blast and re paint	40
41 frame number position	42 right frame rail some old damage from an accident	43	44 back of cab, absolutely rust free
45 back of cab. bed had never been off up to this point paint in center is original. again I have never seen a more solid truck	46	47	48
49 rear crossmember after cutting 100 lb homemade bumper off. no rust but lots of metal work to get frame ready for powder coating	50	51	52
53	54	55	56
57	58	59	60
61	62	63	64
65	66	67	68
69	70	71	72
73	74	75	76
77	78	79	80
81	82	83	84
85	86	87	88
89	90	91	92
93	94	95	96
97	98	99	100
101	102	103	104
105	106	107	108
109	110	111	112
113	114	115 new inner bed strips, used correct resitance spotwelder and exact number as factory	116
117	118 gas tank after metal finishing will be coated inside and painted outside	119 inside of tank,was sandblasted , hole cut for access, will be welded back and coated inside and painted outside will look as original	120
121	122	123	124
125	126	127	128
129	130	131	132
133	134	135	136
137	138	139	140
141	142	143	144
145	146	147	148 serial number under door, left side
149 right front frame number	150 REAR CROSSMEMBER	151	152
153	154	155 die for ribs	156 rusty, crashed end
157	158	159	160
161	162 door painted gloss black guidecoat, to see if any flaws, should paint cab that way tuesday 8/20	163	164
165 soon all the powdercaoting can leave the office	166	167	168
169	170	171	172
173 IM000085.JPG	174 IM000086.JPG	175 IM000087.JPG	176 IM000090.JPG
177 IM000089.JPG	178	179	180
181	182	183	184
185	186	187	188
189	190

Select All.

Sign the Guestbook. Displaying 7 of 7 entries.

great job. I like how you did the boosters
- Dave Langford, Tue, 18 Oct 2005 4:21PM

No. 14, why two vacuum units?
- Gary Troxel, Thu, 25 Aug 2005 4:16PM

Lots of work. I have a 59ff and doing some of the same things you are. Your work looks good. Have fun
- bob pleasanton, Thu, 7 Jul 2005 7:26PM

Rick, could you tell me what type of master cylinder you have there? Part number? Thanks Fleabag!!
- Fleabag, Thu, 5 May 2005 2:07PM

I know how much fun you are having. I have a '47 in about the same stage of reconstruction. I bought 6 to make one. I have some parts. Contact me if you need something.
- Dave Ricke, Wed, 4 May 2005 2:56PM

Rick, looks great, what a solid truck.
- Paul Mierop, Wed, 4 May 2005 9:27AM

hello Rick Great pixs. I have a 56 FF That I am Going to start a refurbishment on soon I hope Its in really good shape body wise , just wiating for the weather to warmup as I dont have a shop to put it in at this time P /S its also yellow good luck Bill
- Bill Gibson, Thu, 28 Apr 2005 5:12AM

Album Properties. Email Album. Send Invitation. Add to Website. Share URL